MORRIS MOTORS LTD. 

ALL MODELS

SERVICE INFORMATION No. G/33

No. OF SHEETS 3 SHEET No. 1

Date of issue: July, 1933

 INSTRUCTIONS FOR FITTING BRAKE-SHOE

ANTI-SQUEAK WEIGHTS

THE following are the instructions necessary for fitting brake-shoe anti-squeak weights on the Morris Minor, Morris Ten, Morris-Cowley, Morris Major and Morris Oxford Models. Morris Minor Models

1. Remove road wheels, brake-drums and brake-shoes.

2. Place a lead weight on brake-shoe in position as shown in sketch hereunder, making sure that clearance exists at both sides of weight, and drill two 1/4 in. diameter holes through brake-shoe web, using the lead weight as a jig.

3. Assemble each brake-shoe with one lead weight on the outside, locating it with two pins and springs. The pins arc fitted first of all with a brass washer, and passed through the weight and shoe. The spring, cup washer and split pin can then be added to each pin, and the shoes, brake-drums, etc., replaced. It is advisable to clean up the linings with a rough file before replacing.

Time, I ½ - 2 hours.